pain and suffering

config/hypr/hypridle.conf

@@ -0,0 +1,35 @@
+general {
+    lock_cmd = pidof hyprlock || hyprlock
+                                                # avoid starting multiple hyprlock instances.
+    before_sleep_cmd = loginctl lock-session    # lock before suspend.
+    after_sleep_cmd = hyprctl dispatch dpms on  # to avoid having to press a key twice to turn on the display.
+}
+
+listener {
+    timeout = 150                                # 2.5min.
+    on-timeout = brightnessctl -s set 10         # set monitor backlight to minimum, avoid 0 on OLED monitor.
+    on-resume = brightnessctl -r                 # monitor backlight restore.
+}
+
+# turn off keyboard backlight, comment out this section if you dont have a keyboard backlight.
+listener {
+    timeout = 150                                          # 2.5min.
+    on-timeout = brightnessctl -sd rgb:kbd_backlight set 0 # turn off keyboard backlight.
+    on-resume = brightnessctl -rd rgb:kbd_backlight        # turn on keyboard backlight.
+}
+
+listener {
+    timeout = 300                                 # 5min
+    on-timeout = loginctl lock-session            # lock screen when timeout has passed
+}
+
+listener {
+    timeout = 330                                 # 5.5min
+    on-timeout = hyprctl dispatch dpms off        # screen off when timeout has passed
+    on-resume = hyprctl dispatch dpms on          # screen on when activity is detected after timeout has fired.
+}
+
+listener {
+    timeout = 1800                                # 30min
+    on-timeout = systemctl suspend                # suspend pc
+}

config/hypr/hyprland.conf

@@ -0,0 +1,354 @@
+# #######################################################################################
+# AUTOGENERATED HYPR CONFIG.
+# PLEASE USE THE CONFIG PROVIDED IN THE GIT REPO /examples/hypr.conf AND EDIT IT,
+# OR EDIT THIS ONE ACCORDING TO THE WIKI INSTRUCTIONS.
+# #######################################################################################
+
+#
+# Please note not all available settings / options are set here.
+# For a full list, see the wiki
+#
+
+# autogenerated = 1 # remove this line to remove the warning
+
+# See https://wiki.hyprland.org/Configuring/Monitors/
+monitor = eDP-1, 1920x1080@60.02000, 0x0, 1.00
+monitor = Virtual-1, 1920x1080,0x0, 1
+#monitor = DP-1, 1920x1080@60, 0x0, 1
+#monitor = HDMI-A-1, 1920x1080@60.02000, 0x0, 1
+#monitor
+# See https://wiki.hyprland.org/Configuring/Keywords/ for more
+
+# Execute your favorite apps at launch
+#exec-once = garuda-welcome
+
+# Add networkmanager applet to tray in waybar
+exec-once = nm-applet --indicator
+
+# Set keyboard layout
+#exec-once = .local/bin/garuda-locale.sh
+exec-once = NetworkManager
+# Set monitor values. For own values, please comment with #
+#exec-once = .local/bin/mon.sh
+exec-once = swww-daemon
+# Source a file (multi-file configs)
+# source = ~/.config/hypr/myColors.conf
+
+# For all categories, see https://wiki.hyprland.org/Configuring/Variables/
+input {
+kb_layout = us
+    kb_variant =
+    kb_model =
+    kb_options =
+    kb_rules =
+    numlock_by_default= true
+    follow_mouse = 1
+
+touchpad {
+    #natural_scroll = true
+    tap-to-click = true
+    disable_while_typing = true
+}
+
+
+    sensitivity = -0.5 # -1.0 - 1.0, 0 means no modification.
+}
+
+general {
+    # See https://wiki.hyprland.org/Configuring/Variables/ for more
+
+    gaps_in = 5
+    gaps_out = 10
+    border_size = 2
+    col.active_border = rgb(D3869B)
+
+
+    col.inactive_border = rgba(595959aa)
+
+    layout = dwindle
+}
+
+decoration {
+    # See https://wiki.hyprland.org/Configuring/Variables/ for more
+
+    rounding = 10
+    blur {
+       enabled = true
+       size = 5
+       passes = 1
+    }
+
+#    drop_shadow = true
+#    shadow_range = 4
+#    shadow_render_power = 3
+#    col.shadow = rgba(1a1a1aee)
+}
+
+animations {
+    enabled = true
+
+    # Some default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
+
+    bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+
+    animation = windows, 1, 7, myBezier
+    animation = windowsOut, 1, 2, default, popin 80%
+    animation = border, 1, 2, default
+    animation = fade, 1, 2, default
+    animation = workspaces, 1, 2, default
+}
+
+dwindle {
+    # See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
+    pseudotile = true # master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
+    preserve_split = true # you probably want this
+}
+
+master {
+    # See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
+   # new_is_master = true
+}
+
+gestures {
+    # See https://wiki.hyprland.org/Configuring/Variables/ for more
+
+}
+misc {
+	disable_hyprland_logo = true
+}
+# Example per-device config
+# See https://wiki.hyprland.org/Configuring/Keywords/
+# executing for more
+
+#device:epic mouse V1 {
+#   sensitivity = -0.5
+#}
+
+# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
+# Example windowrule v1
+#windowrule = float, ^(kitty)$
+#windowrule = float, ^(garuda-assistant)$
+#windowrule = float, ^(garuda-boot-options)$
+#windowrule = float, ^(garuda-boot-repair)$
+#windowrule = float, ^(garuda-gamer)$
+#windowrule = float, ^(garuda-network-assistant)$
+#windowrule = float, ^(garuda-settings-manager)$
+#windowrule = float, ^(garuda-welcome)$
+
+# Example windowrule v2
+# windowrulev2 = float,class:^(kitty)$,title:^(kitty)$
+
+# See https://wiki.hyprland.org/Configuring/Keywords/ for more
+$mainMod = ALT
+
+# Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more
+bind = $mainMod SHIFT, R, exec, hyprctl reload
+#bind = $mainMod, 36, exec, footclient
+bind = $mainMod, E, exec, kitty
+bind = $mainMod, C, killactive,
+bind = $mainMod, M, exec, nwgbar
+bind = $mainMod, G, exec, /home/tulg/.config/looking-glass-client -F -f /dev/kvmfr0 -m 58
+bind = $mainMod SHIFT, O, togglefloating,
+bind = $mainMod, D, exec, wofi  --show drun --allow-images -W 300 -H 500 -l 4
+bind = $mainMod SHIFT, D, exec, nwg-drawer -mb 10 -mr 10 -ml 10 -mt 10
+bind = $mainMod, P, pseudo, # dwindle
+bind = $mainMod SHIFT, P, togglesplit, # dwindle
+
+# Mainmod + Function keys
+bind = $mainMod, F1, exec, firedragon
+bind = $mainMod, F2, exec, thunderbird
+bind = $mainMod, F3, exec, thunar
+bind = $mainMod, F4, exec, geany
+bind = $mainMod, F5, exec, github-desktop
+bind = $mainMod, F6, exec, gparted
+bind = $mainMod, F7, exec, inkscape
+bind = $mainMod, F8, exec, blender
+bind = $mainMod, F9, exec, meld
+bind = $mainMod, F10, exec, joplin-desktop
+bind = $mainMod, F11, exec, snapper-tools
+bind = $mainMod, F12, exec, galculator
+
+# Move focus with mainMod + arrow keys
+bind = $mainMod, left, movefocus, l
+bind = $mainMod, H, movefocus, l
+bind = $mainMod, right, movefocus, r
+bind = $mainMod, L, movefocus, r
+bind = $mainMod, up, movefocus, u
+bind = $mainMod, K, movefocus, u
+bind = $mainMod, down, movefocus, d
+bind = $mainMod, J, movefocus, d
+
+# Switch workspaces with mainMod + [0-9]
+bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 0, workspace, 10
+
+# Move to workspace with focused container with ALT + SHIFT + [0-9]
+bind = ALT SHIFT, 1, movetoworkspace, 1
+bind = ALT SHIFT, 2, movetoworkspace, 2
+bind = ALT SHIFT, 3, movetoworkspace, 3
+bind = ALT SHIFT, 4, movetoworkspace, 4
+bind = ALT SHIFT, 5, movetoworkspace, 5
+bind = ALT SHIFT, 6, movetoworkspace, 6
+bind = ALT SHIFT, 7, movetoworkspace, 7
+bind = ALT SHIFT, 8, movetoworkspace, 8
+bind = ALT SHIFT, 9, movetoworkspace, 9
+bind = ALT SHIFT, 0, movetoworkspace, 10
+
+# Move active window to a workspace with mainMod + SHIFT + [0-9]
+bind = $mainMod SHIFT, 1, movetoworkspacesilent, 1
+bind = $mainMod SHIFT, 2, movetoworkspacesilent, 2
+bind = $mainMod SHIFT, 3, movetoworkspacesilent, 3
+bind = $mainMod SHIFT, 4, movetoworkspacesilent, 4
+bind = $mainMod SHIFT, 5, movetoworkspacesilent, 5
+bind = $mainMod SHIFT, 6, movetoworkspacesilent, 6
+bind = $mainMod SHIFT, 7, movetoworkspacesilent, 7
+bind = $mainMod SHIFT, 8, movetoworkspacesilent, 8
+bind = $mainMod SHIFT, 9, movetoworkspacesilent, 9
+bind = $mainMod SHIFT, 0, movetoworkspacesilent, 10
+
+# Scroll through existing workspaces with mainMod + scroll
+bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_up, workspace, e-1
+
+# Move/resize windows with mainMod + LMB/RMB and dragging
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow
+
+# background
+#exec-once = wpaperd
+
+# status bar
+exec-once = waybar
+layerrule = blur , waybar
+layerrule = ignorezero , waybar
+
+# set volume (laptops only and may or may not work on PCs)
+bind = ,122, exec, pactl set-sink-volume @DEFAULT_SINK@ -5%
+bind = ,123, exec, pactl set-sink-volume @DEFAULT_SINK@ +5%
+bind = ,121, exec, pactl set-sink-volume @DEFAULT_SINK@ 0%
+# other bindings
+#bind = $mainMod, E, exec, kitty 
+bind = $mainMod, F, fullscreen
+bind = $mainMod, Q, exec, kitty lf 
+bind = ,232,exec,brightnessctl -c backlight set 5%-
+bind = ,233,exec,brightnessctl -c backlight set +5%
+#bind = $mainMod SHIFT,C, exec, killall -9 wpaperd && wpaperd
+
+# Screenshots:
+#
+# Change to swappy https://github.com/jtheoof/swappy
+# Old functions only commented out to make it easier for the user to change if necessary.
+
+# Snip a selection and pipe to swappy
+bind = ,Print, exec, grim -g "$(slurp)" - | swappy -f -
+# Screenshot a window and pipe to swappy
+bind = CTRL, Print, exec, .config/hypr/scripts/screenshot_window.sh
+# Screenshot the current display and pipe to swappy
+bind = SHIFT, Print, exec, .config/hypr/scripts/screenshot_display.sh
+
+# https://github.com/hyprwm/contrib/blob/main/grimblast/grimblast.1.scd
+# Print: All outputs
+# SHIFT+Print: Select area
+# $mainMod+Print: Current window
+# $mainMod+Shfit+Print: Current output
+#
+# bind = ,Print, exec, grimblast save screen && notify-send Screenshot captured
+# bind = SHIFT, Print, exec, grimblast save area && notify-send Selected\ area captured
+# bind = $mainMod, Print, exec, grimblast save active && notify-send Active\ window captured
+# bind = $mainMod SHIFT, Print, exec, grimblast output active && notify-send Output captured
+
+# for resizing window
+# will switch to a submap called resize
+bind=$mainMod,R,submap,resize
+
+# will start a submap called "resize"
+submap=resize
+
+# sets repeatable binds for resizing the active window
+binde=,right,resizeactive,50 0
+binde=,L,resizeactive,50 0
+binde=,left,resizeactive,-50 0
+binde=,H,resizeactive,-50 0
+binde=,up,resizeactive,0 -50
+binde=,K,resizeactive,0 -50
+binde=,down,resizeactive,0 50
+binde=,J,resizeactive,0 50
+
+# use reset to go back to the global submap
+bind=,escape,submap,reset
+
+# will reset the submap, meaning end the current one and return to the global one
+submap=reset
+
+# to move window
+bind = $mainMod SHIFT,up, movewindow, u
+bind = $mainMod SHIFT,K, movewindow, u
+bind = $mainMod SHIFT,down, movewindow, d
+bind = $mainMod SHIFT,J, movewindow, d
+bind = $mainMod SHIFT,left, movewindow, l
+bind = $mainMod SHIFT,H, movewindow, l
+bind = $mainMod SHIFT,right, movewindow, r
+bind = $mainMod SHIFT,L, movewindow, r
+
+# other blurings
+blurls = wofi
+blurls = thunar
+blurls = gedit
+blurls = gtk-layer-shell # for nwg-drawer
+blurls = catfish
+# window rules
+#windowrule = opacity 0.85 override 0.85 override,^(thunar)$
+#windowrule = opacity 0.85 override 0.85 override,^(gedit)$
+#windowrule = opacity 0.85 override 0.85 override,^(catfish)$
+#windowrule = stayfocused, ^(wofi)$
+
+# window rules with evaluation
+windowrulev2 = opacity 0.85 0.85,floating:1
+
+exec-once = mako
+exec-once =/usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+exec-once = foot --server
+# experimental(might work might won't)
+
+# pre executions (under development)
+#exec-once=exec xrdb -load ~/.Xresources
+
+# Clipboard Manager
+exec-once = wl-paste --type text --watch cliphist store #Stores only text data
+exec-once = wl-paste --type image --watch cliphist store #Stores only image data
+bind = $mainMod, V, exec, cliphist list | wofi --dmenu | cliphist decode | wl-copy
+
+# video play paues bindings
+bind=,172,exec,playerctl play-pause
+bind=,171,exec,playerctl next
+bind=,173,exec,playerctl previous
+
+# Use gtk-settings
+exec-once = apply-gsettings
+exec-once = gsettings set org.gnome.desktop.interface cursor-theme BreezeX-RosePine-Linux
+exec-once = gsettings set org.gnome.desktop.interface cursor-size 28
+
+env = HYPRCURSOR_THEME,rose-pine-hyprcursor
+env = HYPRCURSOR_SIZE,28
+
+
+
+# Performance Tweaks (For less power consumption without sacrificing performance)
+# See : https://wiki.hyprland.org/Configuring/Performance/
+misc:vfr = true
+
+# enable G-Hyprland
+bind = $mainMod SHIFT, G, exec, footclient -e ~/.local/bin/bear/implement_gum.sh enable
+# Install Garuda Hyprland
+bind = $mainMod, I, exec, .local/bin/calamares.sh
+
+# Let the user customize this hyprstart script by overriding stuff in $hyprstart
+exec-once = .config/hypr/exec-hyprland

config/hypr/hyprlock.conf

@@ -0,0 +1,85 @@
+# background
+background {
+    monitor =
+    #path = screenshot
+    path = /usr/share/wallpapers/garuda-wallpapers/Garuda-TilliDie-cube-105.png
+    color = $background
+    blur_passes = 2
+    contrast = 1
+    brightness = 0.5
+    vibrancy = 0.2
+    vibrancy_darkness = 0.2
+}
+
+# general
+general {
+    no_fade_in = true
+    no_fade_out = true
+    hide_cursor = false
+    grace = 0
+    disable_loading_bar = false
+}
+# animations
+animations {
+    enabled = true
+}
+
+# input field
+input-field {
+    monitor =
+    size = 250, 60
+    outline_thickness = 2
+    dots_size = 0.2 # Scale of input-field height, 0.2 - 0.8
+    dots_spacing = 0.35 # Scale of dots' absolute size, 0.0 - 1.0
+    dots_center = true
+    outer_color = rgba(236, 240, 15, 1)
+    inner_color = rgba(240 , 204, 14, 1)
+    font_color = $foreground
+    fade_on_empty = false
+    rounding = -1
+    check_color = rgb(204, 136, 34)
+    placeholder_text = <i><span foreground="##000000">Input Password...</span></i>
+    hide_input = false
+    position = 0, -200
+    halign = center
+    valign = center
+}
+
+# date
+label {
+  monitor =
+  text = cmd[update:1000] echo "$(date +"%A, %B %d")"
+  color = rgba(242, 243, 244, 0.75)
+  font_size = 22
+  font_family = JetBrains Mono
+  position = 0, 300
+  halign = center
+  valign = center
+}
+
+# time
+label {
+  monitor =
+  text = cmd[update:1000] echo "$(date +"%-I:%M")"
+  color = rgba(242, 243, 244, 0.75)
+  font_size = 95
+  font_family = JetBrains Mono Extrabold
+  position = 0, 200
+  halign = center
+  valign = center
+}
+
+
+# things that can be played by user
+
+Profile Picture
+image {
+    monitor =
+    path = /usr/share/logos/Hyprland_logo.png
+    size = 200
+    border_size = 2
+    border_color = $foreground
+    position = 0, 0
+    halign = center
+    valign = center
+}

config/hypr/hyprstart

@@ -0,0 +1,19 @@
+#!/bin/sh
+cd ~
+# user preferred settings
+
+#cursor size
+export XCURSOR_SIZE=24
+
+# text editor
+export MICRO_TRUECOLOR=1
+export EDITOR=/usr/bin/micro
+
+#browser
+export BROWSER=firefox
+#terminal
+export TERM=kitty
+#mail
+export MAIL=thunderbird
+
+# check /usr/local/bin/hyprstart 

config/hypr/scripts/idle_inhibitor.sh

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+a=$(pidof hypridle)
+if [[ $a ]]
+then
+    killall -9 hypridle
+    notify-send "idle inhibitor activated"
+else
+    notify-send "idle inhibitor deactivated"
+    hypridle &> /dev/null
+fi

config/hypr/scripts/lock.sh

@@ -0,0 +1,29 @@
+#!/bin/sh
+swaylock \
+	--screenshots \
+	--clock \
+  --hide-keyboard-layout \
+	--indicator \
+	--indicator-radius 100 \
+	--indicator-thickness 7 \
+	--effect-blur 7x5 \
+	--effect-vignette 0.5:0.5 \
+	--ring-color cba6f7 \
+  --ring-ver-color 89b4fa \
+  --ring-wrong-color f38ba8 \
+  --ring-clear-color a6e3a1 \
+	--key-hl-color 1e1e2e \
+  --bs-hl-color eba0ac \
+  --text-color 11111b \
+  --text-caps-lock-color 11111b \
+	--line-color 00000000 \
+	--line-ver-color 00000000 \
+	--line-wrong-color 00000000 \
+	--line-clear-color 00000000 \
+	--separator-color 00000000 \
+	--inside-color cba6f7 \
+  --inside-ver-color 89b4fa\
+  --inside-wrong-color f38ba8 \
+  --inside-clear-color a6e3a1 \
+	--grace 2 \
+	--fade-in 0.2

config/hypr/scripts/screenshot_display.sh

@@ -0,0 +1,6 @@
+#!/bin/bash
+# .config/hypr/scripts/screenshot_display.sh
+# Screenshot the current display Shift+Print
+
+output_id=$(hyprctl -j monitors | jq -r '.[] | select(.focused).name')
+grim -o $output_id - | swappy -f -

config/hypr/scripts/screenshot_window.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+# .config/hypr/scripts/screenshot_window.sh
+# Screenshot a window Ctrl+Print
+
+grim -g "$(hyprctl -j activewindow | jq -r '.at + .size | "\(.[0]),\(.[1]) \(.[2])x\(.[3])"' | slurp)" - | swappy -f -

config/kitty/current-theme.conf

@@ -0,0 +1,53 @@
+## name: Rosé Pine Moon
+## author: mvllow
+## license: MIT
+## upstream: https://github.com/rose-pine/kitty/blob/main/dist/rose-pine-moon.conf
+## blurb: All natural pine, faux fur and a bit of soho vibes for the classy minimalist
+
+foreground               #e0def4
+background               #232136
+selection_foreground     #e0def4
+selection_background     #44415a
+
+cursor                   #56526e
+cursor_text_color        #e0def4
+
+url_color                #c4a7e7
+
+active_tab_foreground    #e0def4
+active_tab_background    #393552
+inactive_tab_foreground  #6e6a86
+inactive_tab_background  #232136
+
+# black
+color0   #393552
+color8   #6e6a86
+
+# red
+color1   #eb6f92
+color9   #eb6f92
+
+# green
+color2   #3e8fb0
+color10  #3e8fb0
+
+# yellow
+color3   #f6c177
+color11  #f6c177
+
+# blue
+color4   #9ccfd8
+color12  #9ccfd8
+
+# magenta
+color5   #c4a7e7
+color13  #c4a7e7
+
+# cyan
+color6   #ea9a97
+color14  #ea9a97
+
+# white
+color7   #e0def4
+color15  #e0def4
+

config/kitty/dark-theme.auto.conf

@@ -0,0 +1,53 @@
+## name: Rosé Pine Moon
+## author: mvllow
+## license: MIT
+## upstream: https://github.com/rose-pine/kitty/blob/main/dist/rose-pine-moon.conf
+## blurb: All natural pine, faux fur and a bit of soho vibes for the classy minimalist
+
+foreground               #e0def4
+background               #232136
+selection_foreground     #e0def4
+selection_background     #44415a
+
+cursor                   #56526e
+cursor_text_color        #e0def4
+
+url_color                #c4a7e7
+
+active_tab_foreground    #e0def4
+active_tab_background    #393552
+inactive_tab_foreground  #6e6a86
+inactive_tab_background  #232136
+
+# black
+color0   #393552
+color8   #6e6a86
+
+# red
+color1   #eb6f92
+color9   #eb6f92
+
+# green
+color2   #3e8fb0
+color10  #3e8fb0
+
+# yellow
+color3   #f6c177
+color11  #f6c177
+
+# blue
+color4   #9ccfd8
+color12  #9ccfd8
+
+# magenta
+color5   #c4a7e7
+color13  #c4a7e7
+
+# cyan
+color6   #ea9a97
+color14  #ea9a97
+
+# white
+color7   #e0def4
+color15  #e0def4
+

config/kitty/kitty.conf

@@ -0,0 +1,8 @@
+background_opacity 0.3
+enable_audio_bell no
+
+
+# BEGIN_KITTY_THEME
+# Rosé Pine Moon
+#include current-theme.conf
+# END_KITTY_THEME

config/kitty/kitty.conf.bak

@@ -0,0 +1,2 @@
+background_opacity 0.3
+enable_audio_bell no

config/lf/lf_kitty_clean

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+kitty +kitten icat --clear --stdin no --silent --transfer-mode file < /dev/null > /dev/tty

config/lf/lf_kitty_preview

@@ -0,0 +1,13 @@
+#!/usr/bin/env bash
+file=$1
+w=$2
+h=$3
+x=$4
+y=$5
+
+if [[ "$( file -Lb --mime-type "$file")" =~ ^image ]]; then
+    kitty +kitten icat --silent --stdin no --transfer-mode file --place "${w}x${h}@${x}x${y}" "$file" < /dev/null > /dev/tty
+    exit 1
+fi
+
+pistol "$file"

config/lf/lfrc

@@ -0,0 +1,147 @@
+# interpreter for shell commands
+set shell zsh
+
+# set '-eu' options for shell commands
+# These options are used to have safer shell commands. Option '-e' is used to
+# exit on error and option '-u' is used to give error for unset variables.
+# Option '-f' disables pathname expansion which can be useful when $f, $fs, and
+# $fx variables contain names with '*' or '?' characters. However, this option
+# is used selectively within individual commands as it can be limiting at
+# times.
+set shellopts '-eu'
+
+# set internal field separator (IFS) to "\n" for shell commands
+# This is useful to automatically split file names in $fs and $fx properly
+# since default file separator used in these variables (i.e. 'filesep' option)
+# is newline. You need to consider the values of these options and create your
+# commands accordingly.
+set ifs "\n"
+
+# leave some space at the top and the bottom of the screen
+set scrolloff 10
+
+# Use the `dim` attribute instead of underline for the cursor in the preview pane
+set cursorpreviewfmt "\033[7;2m"
+
+# use enter for shell commands
+map <enter> shell
+
+# show the result of execution of previous commands
+map ` !true
+
+# execute current file (must be executable)
+map x $$f
+map X !$f
+map D set hidden!
+map d set hidden!
+# dedicated keys for file opener actions
+map o &mimeopen $f
+map O $mimeopen --ask $f
+cmd nano ${{
+   nano $f
+}}
+cmd open-with-cli $$@ nano
+#cmd open-with-cli $$@ $fx
+#map e push :open-with-cli<space> ## input application
+map e nano
+map w wp
+map bw wpm
+map br cd /run/media/tulg
+map bp cd /run/media/tulg/backup1/pogland/wallpapers/
+map c cd ~/.config/
+map f wppp
+cmd wp &{{
+    swww img $f    # To make sure our escape sequence still reaches stdout we pipe it to /dev/tty
+}}
+cmd wppp &{{
+    swayimg $f    # To make sure our escape sequence still reaches stdout we pipe it to /dev/tty
+}}
+cmd wpm &{{
+      mv $f /run/media/tulg/backup1/pogland/wallpapers    # To make sure our escape sequence still reaches stdout we pipe it to /dev/tty
+  }}
+
+cmd drives &{{
+    cd  /run/media/tulg     # To make sure our escape sequence still reaches stdout we pipe it to /dev/tty
+  }}
+cmd on-cd &{{
+    # '&' commands run silently in background (which is what we want here),
+    # but are not connected to stdout.
+
+    printf "\033]0; $(pwd | sed "s|$HOME|~|")\007" > /dev/tty    # To make sure our escape sequence still reaches stdout we pipe it to /dev/tty
+}}
+
+# also run at startup
+on-cd
+
+# define a custom 'open' command
+# This command is called when current file is not a directory. You may want to
+# use either file extensions and/or mime types here. Below uses an editor for
+# text files and a file opener for the rest.
+cmd open &{{
+    case $(file --mime-type -Lb $f) in
+        text/*) lf -remote "send $id nano \$fx";;
+        *) for f in $fx; do $OPENER $f > /dev/null 2> /dev/null & done;;
+    esac
+}}
+
+# mkdir command. See wiki if you want it to select created dir
+map a :push %mkdir<space>
+
+# define a custom 'rename' command without prompt for overwrite
+# cmd rename %[ -e $1 ] && printf "file exists" || mv $f $1
+# map r push :rename<space>
+
+# make sure trash folder exists
+# %mkdir -p ~/.trash
+
+# move current file or selected files to trash folder
+# (also see 'man mv' for backup/overwrite options)
+cmd trash %set -f; mv $fx ~/.trash
+
+# define a custom 'delete' command
+# cmd delete ${{
+#     set -f
+#     printf "$fx\n"
+#     printf "delete?[y/n]"
+#     read ans
+#     [ "$ans" = "y" ] && rm -rf $fx
+# }}
+
+# use '<delete>' key for either 'trash' or 'delete' command
+# map <delete> trash
+# map <delete> delete
+
+# extract the current file with the right command
+# (xkcd link: https://xkcd.com/1168/)
+cmd extract ${{
+    set -f
+    case $f in
+        *.tar.bz|*.tar.bz2|*.tbz|*.tbz2) tar xjvf $f;;
+        *.tar.gz|*.tgz) tar xzvf $f;;
+        *.tar.xz|*.txz) tar xJvf $f;;
+        *.zip) unzip $f;;
+        *.rar) unrar x $f;;
+        *.7z) 7z x $f;;
+    esac
+}}
+
+# compress current file or selected files with tar and gunzip
+cmd tar ${{
+    set -f
+    mkdir $1
+    cp -r $fx $1
+    tar czf $1.tar.gz $1
+    rm -rf $1
+}}
+
+# compress current file or selected files with zip
+cmd zip ${{
+    set -f
+    mkdir $1
+    cp -r $fx $1
+    zip -r $1.zip $1
+    rm -rf $1
+}}
+set preview
+set previewer ~/.config/lf/lf_kitty_preview
+set cleaner ~/.config/lf/lf_kitty_clean

config/mako/config

@@ -0,0 +1,16 @@
+anchor=top-right
+font=fira sans 10
+background-color=#232136
+text-color=#D3869B
+width=350
+margin=0,20,20
+padding=10
+border-size=1
+border-color=#232136
+border-radius=5
+default-timeout=10000
+group-by=summary
+icons=1
+
+[grouped]
+format=<b>%s</b>\n%b

config/waybar/config

@@ -0,0 +1,176 @@
+{
+    "layer": "top", // Waybar at top layer
+    "position": "top", // Waybar position (top|bottom|left|right)
+    "height": 40,
+    "width":1920,
+    "margin": "0 0 0 0",
+    "spacing":0,
+
+    // Choose the order of the modules
+    // Add according to your wishes: "custom/weather"
+
+    "modules-left": ["hyprland/workspaces", "hyprland/window"],
+    "modules-center": ["custom/network_traffic"],
+    "modules-right": ["backlight","temperature", "cpu", "memory", "battery", "pulseaudio", "network", "tray", "clock"],
+
+ // Modules configuration
+
+  "hyprland/workspaces": {
+    "format": "{icon}",
+    "on-click": "activate",
+    "all-outputs": true,
+    "sort-by-number": true,
+    "format-icons": {
+      "1": "1",
+      "2": "2",
+      "3": "3",
+      "4": "4",
+      "5": "5",
+      "6": "6",
+      "7": "7",
+      "8": "8",
+      "9": "9",
+      "10": "10",
+      "focused": "",
+      "default": ""
+    },
+    "on-scroll-up": "hyprctl dispatch workspace e+1",
+    "on-scroll-down": "hyprctl dispatch workspace e-1",
+    },
+    "hyprland/window": {
+        "format": "{}",
+	"icon":false,
+	"icon-size" : 20
+    },
+    "idle_inhibitor": {
+        "format": "{icon}",
+       "format-icons": {
+            "activated": "",
+            "deactivated": ""
+        }
+    },
+    "tray": {
+        "icon-size": 20,
+        "spacing": 5
+    },
+    "clock": {
+        "tooltip-format": "<big>{:%A, %d.%B %Y }</big>\n<tt><small>{calendar}</small></tt>",
+        "format": " {:%a %d %b  %I:%M %p}",	//12 hour format
+        //"format": " {:%a %d %b  %H:%M}",	//24 hour format
+        "format-alt": " {:%d/%m/%Y  %H:%M:%S}",
+        //"max-length": 200
+        "interval": 1,
+        "on-click": "~/.config/waybar/scripts/OCV",
+    },
+    "cpu": {
+        "format": "🖳{usage}%",
+        "on-click": "foot -e htop"
+    },
+    "memory": {
+        "format": "🖴 {: >3}%",
+        "on-click": "foot -e htop"
+    },
+    "temperature": {
+        "thermal-zone": 7,  // Check with: # cat /sys/class/hwmon/hwmon*/temp1_input
+        "hwmon-path": "/sys/class/hwmon/hwmon7/temp1_input",
+        "critical-threshold": 80,
+        "format-critical": "{temperatureC}°C ",
+        "format": "{temperatureC}°C "
+    },
+    "backlight": {
+        // "device": "acpi_video1",
+        "format": "{icon} {percent: >3}%",
+        "format-icons": ["", ""],
+        "on-scroll-down": "brightnessctl -c backlight set 1%-",
+        "on-scroll-up": "brightnessctl -c backlight set +1%",
+        "on-click": "~/.config/waybar/scripts/backlight-hint.sh"
+    },
+    "battery": {
+        "states": {
+            // "good": 95,
+            "warning": 30,
+            "critical": 15
+        },
+        "format": "{icon} {capacity: >3}%",
+        "format-icons": ["", "", "", "", ""]
+        // "format-good": "", // An empty format will hide the module
+        // "format-full": "",
+        //"format-icons": ["", "", "", "", "", "", "", "", "", ""]
+        //"format": "&#x202b;{icon}&#x202c; {capacity}%",
+        //"format-icons": ["ﱉ","ﱊ","ﱌ","ﱍ","ﱋ"]
+    },
+      "network": {
+        //"interface": "wlp0s20f3", // (Optional) To force the use of this interface  "format-wifi": "  {essid}",
+        "format": "⚠Disabled",
+        "format-wifi": "",
+        "format-ethernet": "",
+        "format-linked": "{ifname} (No IP)",
+        "format-disconnected": "⚠Disabled",
+        "format-alt": "{ifname}: {ipaddr}/{cidr}",
+        "family": "ipv4",
+        "tooltip-format-wifi": "  {ifname} @ {essid}\nIP: {ipaddr}\nStrength: {signalStrength}%\nFreq: {frequency}MHz\nUp: {bandwidthUpBits} Down: {bandwidthDownBits}",
+        "tooltip-format-ethernet": " {ifname}\nIP: {ipaddr}\n up: {bandwidthUpBits} down: {bandwidthDownBits}",
+        //"min-length": 2,
+        //"max-length": 2,
+        "on-click": "nm-connection-editor"
+    },
+   "custom/updates": {
+       "format": "{} {icon}",
+       "return-type": "json",
+       "format-icons": {
+           "has-updates": "󱍷",
+           "updated": "󰂪",
+        "interval": 7200,
+       },
+       "exec-if": "which waybar-module-pacman-updates",
+       "exec": "waybar-module-pacman-updates",
+       "on-click": "foot -e update"
+   },
+    "custom/power": {
+      	"format":"⏻",
+       	"on-click": "nwgbar",
+      	"tooltip": false,
+   },
+   "custom/keyboard-layout": {
+      	"format": " Cheat", // Icon: keyboard
+        "on-click": "~/.config/waybar/scripts/keyhint.sh",
+     },
+    "custom/launcher": {
+    "format":"    ",
+    	"on-click": "exec nwg-drawer -c 7 -is 70 -spacing 23",
+    	"tooltip": false,
+     },
+     "custom/network_traffic": {
+             "exec": "~/.config/waybar/scripts/network_traffic.sh",
+             "return-type": "json",
+             "format-ethernet": "{icon} {ifname} ⇣{bandwidthDownBytes} ⇡{bandwidthUpBytes}",    // optional
+},
+    "pulseaudio": {
+        "scroll-step": 3, // %, can be a float
+        "format": "{icon} {volume}% {format_source}",
+        "format-bluetooth": "{volume}% {icon} {format_source}",
+        "format-bluetooth-muted": " {icon} {format_source}",
+        "format-muted": " {format_source}",
+        //"format-source": "{volume}% ",
+        //"format-source-muted": "",
+        "format-source": "",
+        "format-source-muted": "",
+        "format-icons": {
+            "headphone": "",
+            "hands-free": "",
+            "headset": "",
+            "phone": "",
+            "portable": "",
+            "car": "",
+            "default": ["", "", ""]
+        },
+        "on-click": "pavucontrol",
+        "on-click-right": "pactl set-source-mute @DEFAULT_SOURCE@ toggle"
+        },
+        // https://github.com/chubin/wttr.in
+        "custom/weather": {
+        "exec": "curl 'https://wttr.in/Essen?format=2'",
+        "interval": 900,
+	    "on-click": "yad --html --uri='https://wttr.in/Essen' --center --fixed --width=1000 --height=680 --timeout=60 --timeout-indicator=right"
+        },
+    }

config/waybar/scripts/OCV

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+yad --width=400 --height=200 \
+--center \
+--fixed \
+--title="Calendar" \
+--no-buttons \
+yad \
+           --calendar

config/waybar/scripts/backlight-hint.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+yad --width=100 --height=100 \
+--center \
+--fixed \
+--title="Backlight" \
+--no-buttons \
+--timeout=10 \
+--timeout-indicator=bottom \
+yad \
+--text="\nScroll your mouse wheel to change \n      the backlight of the monitor." \
+

config/waybar/scripts/cleanup_after_start.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+sleep 20
+hyprctl keyword windowrule "workspace unset,nmtui-colors"
+hyprctl keyword windowrule "workspace unset,calamares"
+hyprctl keyword windowrule "workspace unset,keyhint.sh"
+hyprctl keyword windowrule "workspace unset,firedragon"

config/waybar/scripts/keyhint.sh

@@ -0,0 +1,37 @@
+#!/bin/sh
+# "Change keyboard layout in" "~/.config/hypr/hyprland.conf" " " \
+
+yad --width=530 --height=640 \
+--center \
+--fixed \
+--title="Garuda Hyprland Keybindings" \
+--no-buttons \
+--list \
+--column=Key: \
+--column=Description: \
+--column=Command: \
+--timeout=60 \
+--timeout-indicator=right \
+"ESC" "close this app" "" "=" "modkey" "(set mod Mod4)" \
+"+Shift+g" "G-hyprland" "implement G-Hyprland" \
+"+enter/+t" "Terminal" "(foot)" \
+"" "Application Menu" "(wofi)" \
+"+Shift+d" "Full Launcher" "(nwggrid)" \
+"+o" "" "Open Broswer" \
+"+n" "" "Open Files" \
+"+q" "close focused app" "(kill)" \
+"+v" "clipboard manager" "(cliphist)" \
+"+r" "Resize windows" "(resize)" \
+"Print" "screenshot" "(grimblast)" \
+"Shift+Print" "screenshot region" "(grimblast)" \
+"+Print" "screenshot window" "(grimblast)" \
+"+Shift+e" "power-menu" "(wofi)" \
+"+Shift+c" "Change wallpaper" "(wpaperd)" \
+"+f" "Fullscreen" "Toggles to full screen" \
+"+Shift+f" "fullscreenstate" "Behave full screen without full screen" \
+"+m" "maximize" "Hides all the windows other then focused window" \
+"+Shift+Spacebar" "Float" "Toggle windows to float" \
+"+p" "Dwindle effect" "pseudo" \
+"+Shift+p" "Dwindle effect" "toggle split" \
+"+i" "Calamares" "Install Garuda Hyprland" \
+"" "" "     Window closed in 60 sec."\

config/waybar/scripts/network_traffic.sh

@@ -0,0 +1,109 @@
+#!/bin/bash
+
+# network_traffic.sh [-tPOLLING_INTERVAL] [NETWORK_INTERFACE...]
+
+getopts t: __ && shift
+isecs=${OPTARG:-1}
+ifaces=($@)
+: ${rate_max:=1000000} # maximum transfer rate for {percent}, can be overridden setting the env var
+
+# `snore` adapted from https://blog.dhampir.no/content/sleeping-without-a-subprocess-in-bash-and-how-to-sleep-forever
+# without MacOS workaround, TODO: with _snore_fd initialized separatedly, also i dont touch IFS so dont bother with it
+snore() {
+    local IFS
+    [[ -n "${_snore_fd:-}" ]] || { exec {_snore_fd}<> <(:); } 2>/dev/null
+    read ${1:+-t "$1"} -u $_snore_fd || :
+}
+
+human_readable() {
+  local hrunits=( B K M G T P )
+  local ndigits=${#1}
+  local idxunit=$(( (2 + ndigits) / 3 - 1))
+  local lentrim=$(( ndigits - (idxunit * 3 ) ))
+  echo ${1::$lentrim}${hrunits[$idxunit]}
+}
+
+exit_err() {
+  printf '{"text": "⚠ %s", "tooltip": "%s", "class": "error"}\n' "$@"
+  exit
+}
+
+if test ${#ifaces[@]} -gt 0; then
+# sanity check the interface names
+  for iface in ${ifaces[@]}; do
+    test -h "/sys/class/net/${iface}" || exit_err "${iface}" "${iface} is not an existing network interface name"
+  done
+else
+# default to all interfaces except `lo`
+  ifaces=(/sys/class/net/*)
+  ifaces=(${ifaces[@]##*/})
+  ifaces=(${ifaces[@]^(eth|wlan|enp|wlp|eno)})
+fi
+
+# sanity check polling interval
+if test ${isecs} -lt 1; then
+  exit_err "${isecs}" "${isecs} is not a valid polling interval"
+fi
+# NOTE: `snore` would take a decimal interval but bash arithmetic does not
+#if test $(echo "${isecs} >= 0.2" |bc) -eq 0; then
+#  exit_err "${isecs}" "${isecs} is not a valid polling interval"
+#fi
+
+# NOTE: `/proc/net/dev` format is:
+#   interface:
+#       RX  bytes packets errs drop fifo  frame compressed multicast
+#       TX  bytes packets errs drop fifo  colls carrier compressed
+
+# NOTE: array items are:
+# 0=rx_bytes 1=rx_packets 2=rx_errs 3=rx_drop
+# 4=tx_bytes 5=tx_packets 6=tx_errs 7=tx_drop
+for iface in ${ifaces[@]} aggregate; do
+  declare -a traffic_prev_${iface} traffic_curr_${iface} traffic_delt_${iface}
+  declare -n traffic_prev=traffic_prev_${iface}
+  declare -n traffic_curr=traffic_curr_${iface}
+  declare -n traffic_delt=traffic_delt_${iface}
+  traffic_prev=( 0 0 0 0  0 0 0 0 )
+  traffic_curr=( 0 0 0 0  0 0 0 0 )
+  traffic_delt=( 0 0 0 0  0 0 0 0 )
+done
+
+# TODO: rearrange the loop, do not show bogus on first iteration
+while snore ${isecs} ;do
+  tooltip=""
+  traffic_delt_aggregate=( 0 0 0 0  0 0 0 0 )
+
+  readarray -s2 proc_net_dev </proc/net/dev
+  while read -a data; do
+    iface=${data[0]%:}
+    test "${ifaces[*]}" = "${ifaces[*]//${iface}/}" && continue
+    declare -n traffic_prev=traffic_prev_${iface}
+    declare -n traffic_curr=traffic_curr_${iface}
+    declare -n traffic_delt=traffic_delt_${iface}
+    traffic_curr=(${data[@]:1:4} ${data[@]:9:4})
+    #FIXME: tooltip is delayed one iteration wrt main display (but why?)
+    #printf -v tooltip_hr_rx '%4s⇣' $(human_readable ${traffic_delt[0]})
+    #printf -v tooltip_hr_tx '%4s⇡' $(human_readable ${traffic_delt[4]})
+    #tooltip="${tooltip:+${tooltip}\r}${iface}\t${tooltip_hr_rx}\t${tooltip_hr_tx}"
+    for i in {0..7}; do
+      (( traffic_delt[i] = ( traffic_curr[i] - traffic_prev[i] ) / isecs ))
+      (( traffic_delt_aggregate[i] += traffic_delt[i] ))
+    done
+    traffic_prev=(${traffic_curr[@]})
+  done <<<"${proc_net_dev[@]}"
+
+  printf '{"text": "%4s⇣ %4s⇡", "tooltip": "%s",  "percentage": %d}\n'   \
+    $(human_readable ${traffic_delt_aggregate[0]})  \
+    $(human_readable ${traffic_delt_aggregate[4]})  \
+    "${tooltip}"                                    \
+    $(( ( traffic_delt_aggregate[0] + traffic_delt_aggregate[4] ) / rate_max ))
+  #printf '{"text": "%5s⇣ %5s⇡", "alt": "%s", "tooltip": "%s", "class": "%s", "percentage": %d }\n' $(human_readable ${traffic_delt[0]}) $(human_readable ${traffic_delt[4]}) '_alt' '_tooltip' '_class' 0
+done
+
+
+# NOTE: in waybar config (do NOT use "interval"):
+#         "custom/network_traffic": {
+#             "exec": "~/.config/waybar/scripts/network_traffic.sh",
+#             "return-type": "json",
+#             "format": "Speed: {}",    // optional
+#         },
+

config/waybar/style.css

@@ -0,0 +1,187 @@
+/* =============================================================================
+ *
+ * Waybar configuration
+ *
+ * Configuration reference: https://github.com/Alexays/Waybar/wiki/Configuration
+ *
+ * =========================================================================== */
+ 
+/* -----------------------------------------------------------------------------
+ * Keyframes
+ * -------------------------------------------------------------------------- */
+
+
+/*
+Polar Night
+nord0  #2e3440
+nord1  #3b4252
+nord2  #434c5e
+nord3  #4c566a
+Snow Storm
+nord4  #d8dee9
+nord5  #e5e9f0
+nord6  #eceff4
+Frost
+nord7  #8fbcbb
+nord8  #88c0d0
+nord9  #81a1c1
+nord10 #5e81ac
+Aurora
+nord11 #bf616a
+nord12 #d08770
+nord13 #ebcb8b
+nord14 #a3be8c
+nord15 #b48ead
+*/
+
+/* -----------------------------------------------------------------------------
+ * Base styles
+ * -------------------------------------------------------------------------- */
+ 
+/* Reset all styles */
+
+* {
+    color:#a3be8c;
+    border: 0;
+    border-radius: 0;
+    padding: 0 0;
+    font-family:Symbols Nerd Font Mono;
+    font-size: 15px;
+    margin-right: 5px;
+    margin-left: 5px;
+    padding-bottom:2px;
+   }
+
+window#waybar {
+    background:rgba (0, 0, 0, 0.5);
+    border-radius: 20px 20px 20px 20px; 
+    color: #D3869B;
+}
+
+#workspaces button {
+    padding: 2px 0px;
+    border-bottom: 2px;
+    color: #D3869B;
+    border-color: #d8dee9;
+    border-style: solid;
+    margin-top:2px;
+}
+
+#workspaces button.active {
+    border-color: #D3869B;
+}
+
+#clock, #battery, #cpu, #memory,#idle_inhibitor, #temperature,#custom-keyboard-layout, #backlight, #network, #pulseaudio, #tray, #window,#custom-launcher,#custom-power,#custom-updates ,#custom-network_traffic,#custom-weather{
+    padding: 0 3px;
+    border-bottom: 2px;
+    border-style: solid;
+}
+ 
+/* -----------------------------------------------------------------------------
+ * Module styles
+ * -------------------------------------------------------------------------- */
+
+ 
+#clock {
+ color:#a3be8c;
+}
+
+#backlight {
+    color: #ebcb8b;
+}
+
+#battery {
+    color: #d8dee9;
+}
+
+#battery.charging {
+    color: #81a1c1;
+}
+
+@keyframes blink {
+    to {
+        color: #4c566a;
+        background-color: #eceff4;
+    }
+}
+
+#battery.critical:not(.charging) {
+    background: #bf616a;
+    color: #eceff4;
+    animation-name: blink;
+    animation-duration: 0.5s;
+    animation-timing-function: linear;
+    animation-iteration-count: infinite;
+    animation-direction: alternate;
+}
+
+#cpu {
+    color:#a3be8c ;
+}
+
+#memory {
+    color: #d3869b;
+}
+
+#network.disabled {
+    color:#bf616a;
+}
+
+#network{
+    color:#a3be8c;
+}
+
+#network.disconnected {
+    color: #bf616a;
+}
+
+#pulseaudio {
+    color: #b48ead;
+}
+
+#pulseaudio.muted {
+    color: #3b4252;
+}
+
+#temperature {
+    color: #8fbcbb;
+}
+
+#temperature.critical {
+    color: #bf616a;
+}
+
+#idle_inhibitor {
+   color: #ebcb8b;
+}
+
+#tray {
+}
+
+#custom-launcher{
+        font-size: 20px;
+        background-image: url('/home/tulg/.config/waybar/launcher.png');
+        background-position: center;
+        background-repeat: no-repeat;
+        background-size: contain;
+        border-style: hidden;
+}
+
+#custom-power{
+    border-style: hidden;
+    margin-top:2px;    
+}
+
+#window{
+    border-style: hidden;
+    margin-top:1px;  
+    color: #D3869B;
+}    
+#custom-keyboard-layout{
+   color:#d08770;
+}   
+#custom-network_traffic{
+   color:#d08770;
+}
+
+

config/wofi/config

@@ -0,0 +1,10 @@
+location=middle
+show=drun
+width=650
+height=550
+always_parse_args=true
+show_all=true
+print_command=true
+layer=overlay
+insensitive=true
+prompt=

config/wofi/config.screenshot

@@ -0,0 +1,8 @@
+hide_search=true
+hide_scroll=true
+width=1
+show=dmenu
+lines=5
+location=centre
+x=870
+y=455

config/wofi/style.css

@@ -0,0 +1,51 @@
+window {
+    margin: 0px;
+    background-color: #232136;
+    border-radius: 0px;
+    font-family:Symbols Nerd Font Mono;
+    font-size: 10px;
+}
+
+#input {
+    margin: 3px;
+    border-radius: 0px;
+    border: none;
+    border-radius: 0px;;
+    color: #eb6f92;
+    background-color: #232136;    
+}
+
+#inner-box {
+    margin: 3px;
+    border: none;
+    color: #232136;
+    border-radius: 0px;
+}
+
+#outer-box {
+    margin: 8px;
+    border: none;
+    background-color: #232136;
+}
+
+#scroll {
+    margin: 0px;
+    border: none;
+}
+
+#text {
+    margin: 5px;
+    border: none;
+    color: #e0def4;
+} 
+
+#entry:selectd {
+    color: #232136;
+    border-radius: 0px;;
+    background-color: #232136;
+}
+
+#entry:selected * {
+    color: #232136;
+    border-radius: 0px;;
+}

config/zen-rose-pine/rose-pine-dawn.css

@@ -0,0 +1,17 @@
+* {
+  --base:           #faf4ed;
+  --surface:        #fffaf3;
+  --overlay:        #f2e9e1;
+  --muted:          #9893a5;
+  --subtle:         #797593;
+  --text:           #575279;
+  --love:           #b4637a;
+  --gold:           #ea9d34;
+  --rose:           #d7827e;
+  --pine:           #286983;
+  --foam:           #56949f;
+  --iris:           #907aa9;
+  --highlightLow:   #f4ede8;
+  --highlightMed:   #dfdad9;
+  --highlightHigh:  #cecacd;
+}

config/zen-rose-pine/rose-pine-main.css

@@ -0,0 +1,17 @@
+* {
+  --base:           #191724;
+  --surface:        #1f1d2e;
+  --overlay:        #26233a;
+  --muted:          #6e6a86;
+  --subtle:         #908caa;
+  --text:           #e0def4;
+  --love:           #eb6f92;
+  --gold:           #f6c177;
+  --rose:           #ebbcba;
+  --pine:           #31748f;
+  --foam:           #9ccfd8;
+  --iris:           #c4a7e7;
+  --highlightLow:   #21202e;
+  --highlightMed:   #403d52;
+  --highlightHigh:  #524f67;
+}

config/zen-rose-pine/rose-pine-moon.css

@@ -0,0 +1,17 @@
+* {
+  --base:           #232136;
+  --surface:        #2a273f;
+  --overlay:        #393552;
+  --muted:          #6e6a86;
+  --subtle:         #908caa;
+  --text:           #e0def4;
+  --love:           #eb6f92;
+  --gold:           #f6c177;
+  --rose:           #ea9a97;
+  --pine:           #3e8fb0;
+  --foam:           #9ccfd8;
+  --iris:           #c4a7e7;
+  --highlightLow:   #2a283e;
+  --highlightMed:   #44415a;
+  --highlightHigh:  #56526e;
+}

config/zen-rose-pine/userChrome.css

@@ -0,0 +1,71 @@
+@import "rose-pine-moon.css";
+
+:root {
+  --zen-colors-primary: var(--base) !important;
+  --zen-primary-color: var(--base) !important;
+  --zen-colors-secondary: var(--surface) !important;
+  --zen-colors-tertiary: var(--overlay) !important;
+  --zen-colors-border: var(--iris) !important;
+  --toolbarbutton-icon-fill: var(--iris) !important;
+  --lwt-text-color: var(--text) !important;
+  --toolbar-field-color: var(--text) !important;
+  --tab-selected-textcolor: var(--iris) !important;
+  --toolbar-field-focus-color: var(--text) !important;
+  --toolbar-color: var(--text) !important;
+  --newtab-text-primary-color: var(--text) !important;
+  --arrowpanel-color: var(--text) !important;
+  --arrowpanel-background: var(--overlay) !important;
+  --sidebar-text-color: var(--text) !important;
+  --lwt-sidebar-text-color: var(--text) !important;
+  --lwt-sidebar-background-color: var(--base) !important;
+  --toolbar-bgcolor: var(--base) !important;
+  --newtab-background-color: var(--overlay) !important;
+  --zen-themed-toolbar-bg: var(--base) !important;
+  --zen-main-browser-background: var(--base) !important;
+}
+
+#permissions-granted-icon {
+  color: #181825 !important;
+}
+
+.sidebar-placesTree {
+  background-color: var(--surface) !important;
+}
+
+#zen-workspaces-button {
+  background-color: var(--surface) !important;
+}
+
+#urlbar-background {
+  background-color: var(--surface) !important;
+}
+
+.tab-background[selected=""] {
+  background: var(--overlay) !important;
+}
+
+.content-shortcuts {
+  background-color: var(--surface) !important;
+  border-color: #89b4fa !important;
+}
+
+.urlbarView-url {
+  color: var(--iris) !important;
+}
+
+#zenEditBookmarkPanelFaviconContainer {
+  background: var(--base) !important;
+}
+
+toolbar .toolbarbutton-1 {
+  &:not([disabled]) {
+    &:is([open], [checked])
+      > :is(
+        .toolbarbutton-icon,
+        .toolbarbutton-text,
+        .toolbarbutton-badge-stack
+      ) {
+      fill: var(--base);
+    }
+  }
+}

config/zen-rose-pine/zen-themes.css

@@ -0,0 +1,8 @@
+/* Zen Mods - Generated by ZenMods.
+* FILE GENERATED AT: Saturday, October 11, 2025 at 7:22:29 PM GMT+03:00
+* DO NOT EDIT THIS FILE DIRECTLY!
+* Your changes will be overwritten.
+* Instead, go to the preferences and edit the mods there.
+*/
+
+/* End of Zen Mods */